This EIP deprecates Proof-of-Work (PoW) and supersedes it with the new Proof-of-Stake consensus mechanism (PoS) driven by the beacon chain. Information on the bootstrapping of the new consensus mechanism is documented in EIP-2982. Full specification of the beacon chain can be found in the ethereum/consensus-specs repository.
This document specifies the set of changes to the block structure, block processing, fork choice rule and network interface introduced by the consensus upgrade.
The beacon chain network has been up and running since December 2020. Neither safety nor liveness failures were detected during this period of time. This long period of running without failure demonstrates the sustainability of the beacon chain system and its readiness to become a security provider for the Ethereum Mainnet.
To understand the motivation of introducing the Proof-of-Stake consensus see the Motivation section of EIP-2982.
pow_block.total_difficulty >= TERMINAL_TOTAL_DIFFICULTY and pow_block.parent_block.total_difficulty < TERMINAL_TOTAL_DIFFICULTY.
There can be more than one terminal PoW block in the network, e.g. multiple children of the same pre-terminal block.TERMINAL_TOTAL_DIFFICULTY The amount of total difficulty reached by the network that triggers the consensus upgrade. Ethereum Mainnet configuration MUST have this parameter set to the value 58750000000000000000000.TRANSITION_BLOCK The earliest PoS block of the canonical chain, i.e. the PoS block with the lowest block height.POS_FORKCHOICE_UPDATED An event occurring when the state of the proof-of-stake fork choice is updated.FORK_NEXT_VALUE A block number set to the FORK_NEXT parameter for the upcoming consensus upgrade.TERMINAL_BLOCK_HASH Designates the hash of the terminal PoW block if set, i.e. if not stubbed with 0x0000000000000000000000000000000000000000000000000000000000000000.TERMINAL_BLOCK_NUMBER Designates the number of the terminal PoW block if TERMINAL_BLOCK_HASH is set.Events having the POS_ prefix in the name (PoS events) are emitted by the new proof-of-stake consensus mechanism. They signify the corresponding assertion that has been made regarding a block specified by the event. The underlying logic of PoS events can be found in the beacon chain specification. On the occurrence of each PoS event the corresponding action that is specified by this EIP MUST be taken.
The details provided below must be taken into account when reading those parts of the specification that refer to the PoS events:
* Reference to a block that is contained by PoS events is provided in a form of a block hash unless another is explicitly specified.
* A POS_FORKCHOICE_UPDATED event contains references to the head of the canonical chain and to the most recent finalized block. Before the first finalized block occurs in the system the finalized block hash provided by this event is stubbed with 0x0000000000000000000000000000000000000000000000000000000000000000.
* FIRST_FINALIZED_BLOCK The first finalized block that is designated by POS_FORKCHOICE_UPDATED event and has the hash that differs from the stub.
The following set of parameters is a part of client software configuration and MUST be included into its binary distribution:
* TERMINAL_TOTAL_DIFFICULTY
* FORK_NEXT_VALUE
* TERMINAL_BLOCK_HASH
* TERMINAL_BLOCK_NUMBER
Note: If TERMINAL_BLOCK_HASH is stubbed with 0x0000000000000000000000000000000000000000000000000000000000000000 then TERMINAL_BLOCK_HASH and TERMINAL_BLOCK_NUMBER parameters MUST NOT take an effect.
PoW blocks that are descendants of any terminal PoW block MUST NOT be imported. This implies that a terminal PoW block will be the last PoW block in the canonical chain.
| Name | Value |
|---|---|
MAX_EXTRA_DATA_BYTES |
32 |
Beginning with TRANSITION_BLOCK, a number of previously dynamic block fields are deprecated by enforcing these values to instead be constants. Each block field listed in the table below MUST be replaced with the corresponding constant value.
| Field | Constant value | Comment |
|---|---|---|
ommersHash |
0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347 |
= Keccak256(RLP([])) |
difficulty |
0 |
|
mixHash |
0x0000000000000000000000000000000000000000000000000000000000000000 |
|
nonce |
0x0000000000000000 |
|
ommers |
[] |
RLP([]) = 0xc0 |
Beginning with TRANSITION_BLOCK, the validation of the block's extraData field changes: The length of the block's extraData MUST be less than or equal to MAX_EXTRA_DATA_BYTES bytes.
Note: Logic and validity conditions of block fields that are not specified here MUST remain unchanged. Additionally, the overall block format MUST remain unchanged.
Note: Subsequent EIPs may override the constant values specified above to provide additional functionality. For an example, see EIP-4399.
Beginning with TRANSITION_BLOCK, the block validity conditions MUST be altered by the following:
* Remove verification of the block's difficulty value with respect to the difficulty formula.
* Remove verification of the block's nonce and mixHash values with respect to the Ethash function.
* Remove all validation rules that are evaluated over the list of ommers and each member of this list.
* Add verification of the fields noted in the block structure section.
Note: If one of the new rules fails then the block MUST be invalidated.
Note: Validity rules that are not specified in the list above MUST remain unchanged.
In addition to satisfying the above conditions, TRANSITION_BLOCK MUST be a child of a terminal PoW block. That is, a parent of TRANSITION_BLOCK MUST satisfy terminal PoW block conditions.
Beginning with TRANSITION_BLOCK, block and ommer rewards are deprecated. Specifically, the following actions MUST be taken:
* Remove increasing the balance of the block's beneficiary account by the block reward.
* Remove increasing the balance of the block's beneficiary account by the ommer inclusion reward per each ommer.
* Remove increasing the balance of the ommer's beneficiary account by the ommer block reward per each ommer.
Note: Transaction fee mechanics affecting the block's beneficiary account MUST remain unchanged.
If set, TERMINAL_BLOCK_HASH parameter affects the PoW heaviest chain rule in the following way:
* Canonical blockchain MUST contain a block with the hash defined by TERMINAL_BLOCK_HASH parameter at the height defined by TERMINAL_BLOCK_NUMBER parameter.
Note: This rule is akin to block hash whitelisting functionality already present in client software implementations.
As of the first POS_FORKCHOICE_UPDATED event, the fork choice rule MUST be altered in the following way:
* Remove the existing PoW heaviest chain rule.
* Adhere to the new PoS LMD-GHOST rule.
The new PoS LMD-GHOST fork choice rule is specified as follows. On each occurrence of a POS_FORKCHOICE_UPDATED event including the first one, the following actions MUST be taken:
* Consider the chain starting at genesis and ending with the head block nominated by the event as the canonical blockchain.
* Set the head of the canonical blockchain to the corresponding block nominated by the event.
* Beginning with the FIRST_FINALIZED_BLOCK, set the most recent finalized block to the corresponding block nominated by the event.
Changes to the block tree store that are related to the above actions MUST be applied atomically.
Note: This rule MUST be strictly enforced. "Optimistic" updates to the head MUST NOT be made. That is -- if a new block is processed on top of the current head block, this new block becomes the new head if and only if an accompanying POS_FORKCHOICE_UPDATED event occurs.
For the purposes of the EIP-2124 fork identifier, nodes implementing this EIP MUST set the FORK_NEXT parameter to the FORK_NEXT_VALUE.
The networking stack SHOULD NOT send the following messages if they advertise the descendant of any terminal PoW block:
* NewBlockHashes (0x01)
* NewBlock (0x07)
Beginning with receiving the FIRST_FINALIZED_BLOCK, the networking stack MUST discard the following ingress messages:
* NewBlockHashes (0x01)
* NewBlock (0x07)
Beginning with receiving the finalized block next to the FIRST_FINALIZED_BLOCK, the networking stack MUST remove the handlers corresponding to the following messages:
* NewBlockHashes (0x01)
* NewBlock (0x07)
Peers that keep sending these messages after the handlers have been removed SHOULD be disconnected.
Note: The logic of message handlers that are not affected by this section MUST remain unchanged.
The changes specified in this EIP target a minimal requisite set of consensus and client software modifications to safely replace the existing proof-of-work consensus algorithm with the new proof-of-stake consensus represented by the already in-production beacon chain.
This EIP was designed to minimize the complexity of hot-swapping the live consensus of the Ethereum network. Both the safety of the operation and time to production were taken into consideration. Additionally, a minimal changeset helps ensure that most smart contracts and services will continue to function as intended during and after the transition with little to no required intervention.
Deprecated block fields are replaced with constant values to ensure the block format remains backwards compatible. Preserving the block format aids existing smart contracts and services in providing uninterrupted service during and after this transition.
Particularly, this is important for those smart contracts that verify Merkle proofs of transaction/receipt inclusion and state by validating the hash of externally provided block header against the corresponding value returned by the BLOCKHASH operation.
This change introduces an additional validity rule that enforces the replacement of deprecated block fields.
difficulty with 0After deprecating the proof-of-work the notion of difficulty no longer exists and replacing the block header difficulty field with 0 constant is semantically sound.
The rule set enforcing the PoW seal validity is replaced with the corresponding PoS rules along with the consensus upgrade as the rationale behind this change.
An additional rule validating a set of deprecated block fields is required by the block format changes introduced by this specification.
Existing rewards for producing and sealing blocks are deprecated along with the PoW mechanism. The new PoS consensus becomes both responsible for sealing blocks and for issuing block rewards once this specification enters into effect.
The fork choice rule of the PoW mechanism becomes completely irrelevant after the upgrade and is replaced with the corresponding rule of the new PoS consensus mechanism.
POS_CONSENSUS_VALIDATEDIn prior draft versions of this EIP, an additional POS event -- POS_CONSENSUS_VALIDATED -- was required as a validation condition for blocks. This event gave the signal to either fully incorporate or prune the block from the block tree.
This event was removed for two reasons:
1. This event was an unnecessary optimization to allow for pruning of "bad" blocks from the block tree. This optimization was unnecessary because the PoS consensus would never send POS_FORKCHOICE_UPDATED for any such bad blocks or their descendants, and eventually any such blocks would be able to be pruned after a PoS finality event of an alternative branch in the block tree.
2. This event was dangerous in some scenarios because a block could be referenced by two different and conflicting PoS branches. Thus for the same block in some scenarios, both a POS_CONSENSUS_VALIDATED == TRUE and POS_CONSENSUS_VALIDATED == FALSE event could sent, entirely negating the ability to safely perform the optimization in (1).
The value of FORK_NEXT in EIP-2124 refers to the block number of the next fork a given node knows about and 0 otherwise.
The number of TRANSITION_BLOCK cannot be known ahead of time given the dynamic nature of the transition trigger condition. As the block will not be known a priori, nodes can't use its number for FORK_NEXT and in light of this fact an explicitly set FORK_NEXT_VALUE is used instead.
After the upgrade of the consensus mechanism only the beacon chain network will have enough information to validate a block. Thus, block gossip provided by the eth network protocol will become unsafe and is deprecated in favour of the block gossip existing in the beacon chain network.
It is recommended for the client software to not propagate descendants of any terminal PoW block to reduce the load on processing the P2P component and stop operating in the environment with unknown security properties.
extraDataThe extraData field is defined as a maximum of 32 bytes in the yellow paper. Thus mainnet and most PoW testnets cap the value at 32 bytes. extraData fields of greater length are used by clique testnets and other networks to carry special signature/consensus schemes. This EIP restricts the length of extraData to 32 bytes because any network that is transitioning from another consensus mechanism to a beacon chain PoS consensus mechanism no longer needs extended or unbounded extraData.
This EIP introduces backward incompatibilities in block validity, block rewards and fork choice rule.
The design of the consensus upgrade specified by this document does not introduce backward incompatibilities for existing applications and services built on top of Ethereum except for those that are described in the EVM section below or heavily depends on the PoW consensus in any other way.
Although this EIP does not introduce any explicit changes to the EVM there are a couple of places where it may affect the logic of existing smart contracts.
DIFFICULTY operation will always return 0 after this EIP takes effect and deprecates the difficulty field by replacing it with 0 constant.
Note: Altering the DIFFICULTY semantics to return randomness accumulated by the beacon chain is under consideration but will be introduced in a separate EIP.
Pseudo-random numbers obtained as the output of BLOCKHASH operation become more insecure after this EIP takes effect and the PoW mechanism (which decreases the malleability of block hashes) gets supplanted by PoS.
TRANSITION_BLOCK, block is invalidated if any of the following is true:ommersHash != Keccak256(RLP([]))difficulty != 0nonce != 0x0000000000000000len(extraData) > MAX_EXTRA_DATA_BYTESTRANSITION_BLOCK, block rewards aren't added to beneficiary accountPOS_FORKCHOICE_UPDATED eventPOS_FORKCHOICE_UPDATED event is receivedTRANSITION_BLOCK, client software applies new block validity rulesPOS_FORKCHOICE_UPDATED, client software switches its fork choice rule to PoS LMD-GHOSTTRANSITION_BLOCK must be a child of a terminal PoW blockNewBlockHashes (0x01) and NewBlock (0x07) network messages are discarded after receiving the FIRST_FINALIZED_BLOCKSee Security Considerations section of EIP-2982.
The transition process used to take this specification into effect is a more sophisticated version of a hardfork -- the regular procedure of applying backwards incompatible changes in the Ethereum network. This process has multiple successive steps instead of the normal block-height point condition of simpler hardforks.
The complexity of this upgrade process stems from this fork targeting the underlying consensus mechanism rather than the execution layer within the consensus mechanism. Although the design seeks simplicity where possible, safety and liveness considerations during this transition have been prioritized.
Using a pre-defined block number for the hardfork is unsafe in this context due to the PoS fork choice taking priority during the transition.
An attacker may use a minority of hash power to build a malicious chain fork that would satisfy the block height requirement. Then the first PoS block may be maliciously proposed on top of the PoW block from this adversarial fork, becoming the head and subverting the security of the transition.
To protect the network from this attack scenario, difficulty accumulated by the chain (total difficulty) is used to trigger the upgrade.
There could be the case when a terminal PoW block is not observed by the majority of network participants due to (temporal) network partitioning. In such a case, this minority would switch their fork choice to the new rule provided by the PoS rooted on the minority terminal PoW block that they observed.
The transition process allows the network to re-org between forks with different terminal PoW blocks as long as (a) these blocks satisfy the terminal PoW block conditions and (b) the FIRST_FINALIZED_BLOCK has not yet been received. This provides resilience against adverse network conditions during the transition process and prevents irreparable forks/partitions.
Suppose the part of the client software that is connected to the beacon chain network goes offline before the Ethereum network reaches the TERMINAL_TOTAL_DIFFICULTY and stays offline while the network meets this threshold. Such an event makes the client software unable to switch to PoS and allows it to keep following the PoW chain if this chain is being built beyond the terminal PoW block. Depending on how long the beacon chain part was offline, it could result in different adverse effects such as:
* The client has no post-state for the terminal PoW block (the state has been pruned) which prevents it from doing the re-org to the PoS chain and leaving syncing from scratch as the only option to recover.
* An application, a user or a service uses the data from the wrong fork (PoW chain that is kept being built) which can cause security issues on their side.
Not importing PoW blocks that are beyond the terminal PoW block prevents these adverse effects on safety/re-orgs in the event of software or configuration failures in favor of a liveness failure.
There is a mechanism allowing for accelerating the consensus upgrade in emergency cases. This EIP considers the following emergency case scenarios for the acceleration to come into effect: * A drop of the network hashing rate which delays the upgrade significantly. * Attacks on the PoW network before the upgrade.
The first case can be safely accelerated by updating the following parameters:
* TERMINAL_TOTAL_DIFFICULTY -- reset to a value that is closer in time than the original one.
* FORK_NEXT_VALUE -- adjust accordingly.
The second, more dire attack scenario requires a more invasive override:
* TERMINAL_BLOCK_HASH -- set to the hash of a certain block to become the terminal PoW block.
* TERMINAL_BLOCK_NUMBER -- set to the number of a block designated by TERMINAL_BLOCK_HASH.
* TERMINAL_TOTAL_DIFFICULTY -- set to the total difficulty value of a block designated by TERMINAL_BLOCK_HASH.
* FORK_NEXT_VALUE -- adjust accordingly.
Note: Acceleration in the second case is considered for the most extreme of scenarios because it will result in a non-trivial liveness failure on Ethereum Mainnet.
Keeping historical blocks starting from genesis is essential in the PoW network. A header of every block that belongs to a particular chain is required to justify the validity of this chain with respect to the PoW seal.
Validating the entire history of the chain is not required by the new PoS mechanism. Instead, the sync process in the PoS network relies on weak subjectivity checkpoints, which are historical snapshots shared by peers on the network. This means historical blocks beyond weak subjectivity checkpoint are no longer a requisite for determining the canonical blockchain.
Specification of weak subjectivity checkpoints can be found in the ethereum/consensus-specs repository.
Copyright and related rights waived via CC0.